Gold-Inlay Engraving with AirGraver- Part 1.4
- DescriptionHand engraving a high art knife with the 
 Lindsay AirGraver: Part 1, initial outline cutting.
 The AirGraver is an engraving tool that runs from
 direct, steady air-flow and utilizes either an air
 compressor or CO2 cartridges for portability. The
 device can be set up to operate from the natural
 pressure of the user's hand (PalmControl) or may
 be operated using a foot pedal. www.AirGraver.com
 www.EngravingArtist.comwww.EngravingClasses.com
 www.EngravingForum.com View a photo of the completed
 engraving here: www.EngravingArtist.com/goldknife.jpg
- Author
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.
